To start with I am running Windows 7 Build 6956. It is being ran on an Acer Aspire E380 with specs of:
AMD Athlon 64 x2 440+; 2 Gigs of DDR2 Ram; 320 Gb Sata HDD partitioned down to 3 drives; 1 120 GB IDE HDD running as slave; IDE Dual Layer DVD-R/RW Drive running Master. There is only one IDE controller. The IDE HDD shows up in device manager functioning properly, as well as in the BIOS, and Disk Management. The problem is it does not show up in My Computer at all. All drivers are installed and up to date. Any help on this would be great.

Slave IDE Hard Drive Issue Build 6956
Started by
HorsemenTech
, Dec 10 2008 01:34 AM
3 replies to this topic
|
|
#2
Posted 10 December 2008 - 01:52 AM
Even i had the same problem...i just tried many options..but only one thing made it to work..Just try putting that IDE Harddisk in Master and the DVD Drive in slave...
#3
Posted 10 December 2008 - 02:52 AM
That did the trick. Thanks that was next on the list.
#4
Posted 10 December 2008 - 09:11 AM
welcome....